Login or Register to make a submission.

Submission Preparation Checklist

As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.
  • The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor).
  • The submission file is in OpenOffice, Microsoft Word, or RTF document file format.
  • Where available, URLs for the references have been provided.
  • The text is single-spaced; uses a 12-point font; employs italics, rather than underlining (except with URL addresses); and all illustrations, figures, and tables are placed within the text at the appropriate points, rather than at the end.
  • The text adheres to the stylistic and bibliographic requirements outlined in the Author Guidelines.

Author Guidelines

Manuscript Submission

Submission of a manuscript implies: that the work described has not been published before; that it is not under consideration for publication anywhere else; that its publication has been approved by all co-authors, if any, as well as by the responsible authorities – tacitly or explicitly – at the institute where the work has been carried out. The publisher will not be held legally responsible should there be any claims for compensation.


Plagiarism Policy 

All the submitted manuscripts for publication are checked for plagiarism after submission and before starting review. If plagiarism is detected by the editorial board member, reviewer, editor, etc., in any stage of the article process- before or after acceptance then we will alert the same to the author(s) and will ask them to rewrite the content or the to cite the references from where the content has been taken. If more than 20% of the paper is plagiarized- the article will be rejected and the same is notified to the author. The JKUES is using the Turnitin program for checking.



Authors wishing to include figures, tables, or text passages that have already been published elsewhere are required to obtain permission from the copyright owner(s) for both the print and online format and to include evidence that such permission has been granted when submitting their papers. Any material received without such evidence will be assumed to originate from the authors.


Types of Contributions

 Research Papers, Short Communication, Technical Notes, and Book Reviews will be included.



Manuscripts should be submitted to the journal website submission system. The manuscript should be prepared in MS-WORD/ or Latex format only. The style of our template is two-column, 12-point font, 1-inch margins all around. The page contains the Title and authors’ names, postal addresses, fax, and email should be un-numbered. The corresponding author should be signed with an asterisk. The rest pages of the text should be numbered one after the other. Manuscripts submitted to JKUES should contain the concise and definitive title of the paper, abstract (200-400 words suitable acceptable), up to 5 keywords, main text including introduction, study zone, material and methods, results and discussion, conclusion, references, acknowledgments, tables and figure captions on a separate page, list of cryptograms and abbreviations, numbered list of references, brief biographical sketch (if necessary). The deadline given by the Editor-in-Chief should be strictly followed for the return of revised manuscripts.



The title should be given in English and should be concise and definitive without abbreviations unless for necessary.


Author Names and Affiliations

Authors' names, authors' institutional affiliations besides addresses and emails should be given. The grant number of the paper: besides the full name of the grant agency or institution should be given.



  1. To give a clear idea about the research objectives, methods conducted and results of the article that readers may understand whether the full text will be of particular interest to them.
  2. To provide key words and phrases for indexing, abstracting, and retrieval purposes, the abstract should be written in concise and authoritative with concentrate the whole subject matter into a few words for fast reading. 



should not repeat nouns used in the title and should describe the keywords used in the studied problem as best as possible.



References are to be numbered and cited in the text by number. They are to be listed in the reference section of the paper in order of the first citation in the text. If three or more authors have written a publication use the first author followed by "et al" in the text (you can use the JKUES EndNote style). References should be listed in the reference section following the text of the manuscript:

[1]     Ning, X., and Lovell, M. R., 2002, "On the Sliding Friction Characteristics of  

            Unidirectional Continuous FRP Composites," ASME J. Tribol.,

         124(1), 5-13.

[2]     Barnes, M., 2001, "Stresses in Solenoids," J. Appl. Phys., 48(5), 2000–


[3]     Jones, J., 2000, Contact Mechanics, Cambridge University Press, Cambridge,

         UK, Chap. 6.

[4]     Lee, Y., Korpela, S. A., and Horne, R. N., 1982, "Structure of Multi-Cellular

         Natural Convection in a Tall Vertical Annulus," Proc. 7th International

         Heat Transfer Conference, U. Grigul et al., eds., Hemisphere, Washington, 

                    DC, 2, 221–226.

[5]     Hashish, M., 2000, "600 MPa Waterjet Technology Development," High

         Pressure Technology, PVP-Vol. 406, 135-140.

[6]     Watson, D. W., 1997, "Thermodynamic Analysis," ASME Paper No. 97-GT-


[7]    Tung, C. Y., 1982, "Evaporative Heat Transfer in the Contact Line of a

         Mixture," Ph.D. thesis, Rensselaer Polytechnic Institute, Troy, NY.


The final decision on publication is made by the Editor-in-Chief upon recommendation of an Associate Editor and/or an Editorial Board Member. If the manuscript is accepted for publication in JKUES, it must not be published in any periodical elsewhere without the permission of the Editor-in-Chief.

Electrical Engineering

The topics related to this journal include but are not limited to:
• Acoustics, speech & signal processing.
• Antennas and propagation.
• Circuits and systems.
• Communication.
• Control systems.
• Control theory & industrial controls.
• Electrical machinery.
• Electron devices.

Chemical Science and Engineering

The series Topics in Current Chemistry presents critical reviews of the present and future trends in modern chemical research. The scope of coverage is all areas of chemical science including the interfaces with related disciplines such as biology, medicine and materials science.

Mechanical Engineering

The topics related to this journal include but are not limited to:
• Aerodynamics and Fluid Mechanics.
• Biomechanics.
• Combustion and Energy Systems.
• Design and Manufacturing.
• Dynamics and Control.
• Materials and Structures.
• Vibrations, Acoustics and Fluid-Structure Interaction.

Aeronautical Engineering

The topics related to this journal include but are not limited to:
Space mission analysis and design.
Mechanics of flight.
Aircraft design.
Management and business.
Heat transfer.
Airframe design and flight dynamics.
Space systems.

Surveying Engineering

It includes traditional topics such as construction surveys, geodetic and control surveys, photogrammetric mapping, engineering layout, deformation measurements, precise alignment, boundary surveying, adjustment computations, uncertainty analysis, and hydrographic surveying.

Civil Engineering

Topics covered within the field of Civil engineering include road design, drainage and sewer design, site layouts, structural engineering, geotechnical engineering, environmental engineering, construction engineering, and surveying.

Computer Science and Information Technology

The topics related to this journal include but are not limited to:

      • Role of human-computer interaction.
      • AI and robotics.
      • Software engineering and programming.
      • High-performance computing.
      • Geo informational systems, databases, and data mining.
      • Compiler optimization and embedded systems.
      • Networking and security.
    • Network Security and Cryptography.

Mathematical Science

Research Areas
1. Algebra, Combinatorics, and Geometry. ...
2. Analysis and Partial Differential Equations. ...
3. Applied Analysis. ...
4. Mathematical Biology. ...
5. Mathematical Finance. ...
6. Numerical Analysis and Scientific Computing. ...
7. Topology and Differential Geometry.

Physics science

Research Topics:
1. Extreme Universe.
2. The Physics of Chemistry and Mathematics of Life.
3. New Materials and Quantum Technologies.
4. Energy, Sustainability and New Materials.
5. Global Change and Natural Hazards.
6. Managing the Commons.


Main Objective

Conference aims to share knowledge and opinion between Sudanese researchers, Engineers and Scientists in the aerospace field and its applications so as to solve any relevant problems with available local resources (material or human).

Fields of interest

1. Mechanical design and manufacturing
2. Chemical design and manufacturing
3. Aerodynamic science
4. Ballistics
5. Propulsion
6. Guidance and control
7. Material Engineering and science
8. Industrial chemistry
9. Industrial chemistry safty and environment
10. Electronic design and manufacturing
11. Communication and computer science
12. Measurement and calibration

Privacy Statement

The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.