Manufacturing of High-Pressure Temperature Composite Tube using Filament Winding

Authors

  • Mohammed Abdelgadir Abdalla Mohammed Karary University, Khartoum,12304 Sudan
  • Mohamed Talballa Elsheikh Karary University, Khartoum,12304 Sudan

DOI:

https://doi.org/10.54388/jkues.v1i2.27

Keywords:

winding machine, composite tube, fiberglass, carbon fiber

Abstract

In this study, a winding process for sixteen E-fiberglass composite tube was made. Before the processing, fiber had been tested for tensile strength for E-fiberglass and carbon fiber. Nine polymer matrix laboratory scale were made and analyzed using thermal gravimetric analysis (TG), and differential scanning calorimetry (DSC). Fourteen wounded tubes were tested for burst pressure using hydrostatic test, to measure the performance winding process, matrix material, and winding angle patterns. The pattern (±45)6, 90, with resins EPN 1338 and E44, with curing agent DJ651 gives the best burst pressure, which was 11.3 MPa. The two last tubes were tested for high temperature using 85g black powder for the first tube, and 250g for the second one, producing pressure about 1.38 MPa, and 5.23 MPa for the first and the second tube respectively. Even with increasing black powder amount three times, the yielding pressure increased about 3.8 times in the second tube, while the composite tube outer temperature for the first and the second one was 48°C, and 71°C respectively, which just increased about one-half times.

References

Pilato, L. A., Michno, J. M., Advanced Composite Materials, 1st ed.

Berlin: Springer-Verlag Berlin Heidelberg GmbH, 1994.

Mrazova, M., Advanced composite materials of the future in aerospace

industry:INCAS Bull.:2013:5, (3):139150,

Liu, H., Wang, C., Liu, Y., Yuan, B., Study on structure optimization

of Lap Region between Skirt and Composite Case:Procedia Eng.:

:15:45634567.

Hugh, R., Pressure Vessel Design, Fabrication, Analysis, and Testing,

in Composite Filament Winding, S. T. Peters, Ed. Materials Park: ASM

International, 2011, 115148.

Sutton, G. P., Biblarz, O., Rocket propulsion elements: an introduction to

the engineering of rockets, 8th ed. New York: Wiley, 2010.

ASTM Standard, Standard Test Methods for Properties of Continuous

Filament Carbon and Graphite:1993:D 4018-99:17.

Downloads

Published

2021-12-21

How to Cite

Abdelgadir Abdalla Mohammed, M., & Mohamed Talballa Elsheikh. (2021). Manufacturing of High-Pressure Temperature Composite Tube using Filament Winding . Journal of Karary University for Engineering and Science, 1(2). https://doi.org/10.54388/jkues.v1i2.27