About the Journal

The (JKUES) provides an effective aid for the dissemination of Engineering and science researches, inspiring interdisciplinary research cooperation to solve the problems related to the engineering and science fields. The JKUES is not limited to a specific aspect of science and engineering but is instead devoted to a wide range of subfields in engineering and sciences. The journal publishes original and review articles in all engineering and science and all science disciplines, which are related to the technology trends. The survey, tutorial, and discussion papers from experts in these fields also are welcome to publish in this journal. The JKUES appears as two types; online (ISSN: 1858-8034) and print (ISSN: 1858-800X). Moreover, the JKUES will be reviewed with double-blind peer reviews, and the journal is quarterly published by year.

Current Issue

JKUES, Volume 2, Issue 2 (Jun-30 2022)
					View JKUES, Volume 2, Issue 2 (Jun-30 2022)

Many studies have investigated the crude oil separation process's separation mechanisms, size, and design, employing horizontal 3-Phase Gravity Separators in depth. There are, however, very few articles on their dynamics, modelling, and simulation. Understanding its dynamic behaviour will aid in designing and tuning the device that can manage water level, oil level, and gas pressure in response to feeding variations. This Scientific Paper gives a complete mathematical analysis, modelling, and simulation of a crude oil separation process using a horizontal 3-Phase Gravity Separator using Mathworks Matlab R2016b-x64 and Aspen Hysys V10. Bishoy's Equations, which were constructed, will assist in operating this gadget, locating various variables, and observing the effect of modifying variables on the system's variables. The rationale for this study was developed in response to the small number of articles discovered, which may be a covert issue held up by large oil companies, as well as the complicated equations related to this process that remain unsolved, and to monitor what is happening in this complex dynamic process. As a result, this Research Paper is unique and novel, and it can be compared to the work done by some authors who did not solve the obtained differential equations and did not go further in Aspen Hysys Modeling and Simulation, whereas this paper provides everything related to a three-phase gravity separator, including changing of variables and observing the effect on the system when those variables were modified. Furthermore, separators are designed with internal baffles to promote laminar flow and increase separator efficiency. However, it has been assumed that there are no baffles here, which is a significant problem, but with the help of these equations, the horizontal three-phase gravity separator can be operated at its maximum efficiency. The equations determined the following variables: The height of gas, water, oil, the height of oil when it jumped the weir, the pressure of the gas (in and out), water pressure (in and out), oil pressure (in and out), and the effect of increasing (control valve's stem position) and decreasing $ Q_{in} $ (inlet volumetric flowrate) on these variables have all been studied. This article discovered that increasing the control valve stem position and decreasing the inflow volumetric flowrate of both oil and water was highly unsafe and caused significant variations in the system's heights and pressures using Matlab. The Aspen Hysys analysis optimally separates the oil, gas, and water to determine material, energy streams properties, and compositions. As a result, this complex dynamic behaviour was observed, and no additional articles were discovered that addressed this subject. This process monitoring will determine the best conditions for flawless separation, with the selectivity of the desired product or products as the primary goal. This research can revolutionize the way people think about oil and gas extraction and processing and benefit colossal oil and gas firms in Europe, Asia, and Africa.

Published: 2024-04-30

Electrical Engineering

Chemical Science and Engineering

Civil Engineering

View All Issues

Plagiarism Policy 

All the submitted manuscripts for publication are checked for plagiarism after submission and before starting the review. If plagiarism is detected by the editorial board member, reviewer, editor, etc., in any stage of the article process- before or after acceptance then we will alert the same to the author(s) and will ask them to rewrite the content or to cite the references from where the content has been taken. If more than 20% of the paper is plagiarized- the article will be rejected and the same is notified to the author. The JKUES is using the Turnitin program for checking.



Authors wishing to include figures, tables, or text passages that have already been published elsewhere are required to obtain permission from the copyright owner(s) for both the print and online format and to include evidence that such permission has been granted when submitting their papers. Any material received without such evidence will be assumed to originate from the authors.


Types of Contributions

 Research Papers, Short Communication, Technical Notes, and Book Reviews will be included.



Manuscripts should be submitted to the journal website submission system. The manuscript should be prepared in MS-WORD/ or Latex format only. The style of our template is two-column, 12-point font, with 1-inch margins all around. The page contains the Title and authors’ names, postal addresses, fax, and email should be un-numbered. The corresponding author should be signed with an asterisk. The rest pages of the text should be numbered one after the other. Manuscripts submitted to JKUES should contain the concise and definitive title of the paper, abstract (200-400 words suitable acceptable), up to 5 keywords, main text including introduction, study zone, material and methods, results and discussion, conclusion, references, acknowledgments, tables and figure captions on a separate page, list of cryptograms and abbreviations, numbered list of references, brief biographical sketch (if necessary). The deadline given by the Editor-in-Chief should be strictly followed for the return of revised manuscripts.



The title should be given in English and should be concise and definitive without abbreviations unless necessary.


Author Names and Affiliations

Authors' names and authors' institutional affiliations besides addresses and emails should be given. The grant number of the paper: besides the full name of the grant agency or institution should be given.



  1. To give a clear idea about the research objectives, methods conducted and results of the article so that readers may understand whether the full text will be of particular interest to them.
  2. To provide keywords and phrases for indexing, abstracting, and retrieval purposes, the abstract should be written in a concise and authoritative with a concentration on the whole subject matter in a few words for fast reading. 



should not repeat nouns used in the title and should describe the keywords used in the studied problem as best as possible.



References are to be numbered and cited in the text by number. They are to be listed in the paper's reference section in order of the first citation in the text. If three or more authors have written a publication use the first author followed by "et al" in the text (you can use the JKUES EndNote style). References should be listed in the reference section following the text of the manuscript:

[1]     Ning, X., and Lovell, M. R., 2002, "On the Sliding Friction Characteristics of Unidirectional Continuous FRP Composites," ASME J. Tribol.,124(1), 5-13.

[2]     Barnes, M., 2001, "Stresses in Solenoids," J. Appl. Phys., 48(5), 2000–2008.

[3]     Jones, J., 2000, Contact Mechanics, Cambridge University Press, Cambridge,UK, Chap. 6.

[4]     Lee, Y., Korpela, S. A., and Horne, R. N., 1982, "Structure of Multi-Cellular Natural Convection in a Tall Vertical Annulus," Proc. 7th International Heat Transfer Conference, U. Grigul et al., eds., Hemisphere, Washington, DC, 2, 221–226.

[5]     Hashish, M., 2000, "600 MPa Waterjet Technology Development," High Pressure Technology, PVP-Vol. 406, 135-140.

[6]     Watson, D. W., 1997, "Thermodynamic Analysis," ASME Paper No. 97-GT-288.

[7]    Tung, C. Y., 1982, "Evaporative Heat Transfer in the Contact Line of a Mixture," Ph.D. thesis, Rensselaer Polytechnic Institute, Troy, NY.


The Editor-in-Chief makes the final decision on publication upon the recommendation of an Associate Editor and/or an Editorial Board Member. If the manuscript is accepted for publication in JKUES, it must not be published in any periodical elsewhere without the permission of the Editor-in-Chief.